How to deal with the water problem of LED display?

- Aug 26, 2017-

Whether indoor or outdoor screen screen. The most effective way to avoid the wet damage function is often used to display, the working state of display itself will generate some heat, some water vapor can be evaporated, thus greatly reducing the possibility of short-circuit caused by damp. As a result, the often used display screen has a much smaller impact on the relative humidity of the less common display. Insiders suggested that in the rainy season, LED screen display at least once a week more than once, at least once a month to open the screen, lit more than 2 hours.

In addition to the installed LED display, in the rainy season should pay attention to waterproof, moisture-proof, engineering and channel operators also understand the LED display in the warehouse water treatment.

Proper handling method of water inlet for screen of LED display panel:

1, with the fastest speed with fans or other tools, the water inlet LED screen screen completely dried.

2, completely dry the screen after the aging of the body, the specific steps are as follows:

A, the brightness (Quan Bai) tune to 10%, electrify aging 8-12 hours.

B, the brightness (Quan Bai) tune to 30%, electrify aging 12 hours.

C, the brightness (Quan Bai) tune to 60%, electrify aging 12-24 hours.

D, the brightness (Quan Bai) tune to 80%, electrify aging 12-24 hours.

E, the brightness (Quan Bai) tune to 100%, electrify aging 8-12 hours.

With the above procedure, the LED screen will be restored to normal, but the following points should also be noted during the process:

1, do not put the LED display screen body into the air box, so that it is easy to LED lamp muffled.

2, in the warehouse when the water, the air box may be flooded, should be exposed to all air boxes, to prevent the water in the container after the evaporation to the LED display inside.

3, all influent LED display does not deal with in time, may more or less affect the stability of the screen, in the emergency process, the screen power may occur after the death of the phenomenon of light.

4. All inlet LED display screens are in the air box. More than 72 hours, the screen basically no repair value, please handle with care.